The Walking Foot– Optional or Necessary?

What is a Walking Foot?

A walking foot, additionally called a quilting foot, is an extra part on a sewing machine with feed dogs to control at least two layers of texture equally through your machine. It feeds the backing, batting and quilt top through the machine equally, and can be utilized to stitch delicate bends or to machine sew in the ditch. A walking foot likewise functions admirably for:

  • Straight-line quilting
  • Including a quilt binding
  • Quilting with minky or other smooth or knit textures
  • Sewing plaids

Essentially, the walking foot gives a holding point from the top of the texture which facilitates with the grasp of the feed dogs in the bed of your sewing machine. As the base feed dogs pull– or feed– the texture under the needle so that even lines are made, the walking foot is holding and pulling the texture through from the top.

When is a walking foot “Optional”?

If you’re working with two layers of a mostly stable woven texture, there is almost no requirement for a walking foot. The weight of your feed dogs against a standard foot gives all the grinding required to the texture layers to travel through easily.

What are the “Discretionary, however Helpful” Uses?

When working with laminates or oilcloth, a walking foot unquestionably keeps these “sticky” textures moving.

If you have a few layers of texture or heavier, canvas-sort textures, it’s frequently troublesome for the machine foot to give enough strain to keep the texture layers from moving. Visit pinning may tackle the issue, yet a walking foot is helpful.

When is a Walking Foot “Necessary”?

If you are stitching layers of texture with batting, a walking foot keeps every one of the layers steady and moving easily.

Topstitching on knits. No additionally watching the knits crawl and cluster as you complete neck edges or hems.

Strolling feet are not low-priced, but depending upon the sort of activities you take a shot at, you’re sewing can be significantly more wonderful when you utilize one.


What to Look for When Buying a Walking Foot

It’s most vital to purchase a walking foot that is made for your sewing machine, so ensure you know the make and model when you are shopping. On the off chance that you can’t get the right foot from your producer, a generic model might be accessible. You’ll need to know whether your machine is a high-shank or low-shank machine, so check the manual. Some walking feet can have a channel guide connection, which goes on the side and helps quilters with parallel lines.

Will a Walking Foot Break?

Since a walking foot is a mechanical foot, indeed, it can be destroyed or even break with utilization. Regardless of whether you sew with a plastic or metal walking foot, the base piece of the foot may break off. A piece of the plastic may progress toward becoming chipped, or the foot itself can break on the off chance that you tragically try to sew backward.

In the event that you see a split in the plastic that encompasses the walking foot, you might have the capacity to supplant only the plastic case. Generic walking feet can now and then be inexpensively made and they tend to break more frequently than feet from a trustworthy source, similar to your sewing machine maker.

Does a Walking Foots Need Maintenance?

Similarly as a sewing machine ought to be cleaned, a walking foot can be cleaned to keep it free of texture dust and different leftovers. On the off chance that you have tenacious issues with your walking foot or you’re sewing machine, it might be an ideal opportunity to take it in to your neighborhood sewing machine merchant or repair shop to be cleaned and overhauled.

Some machine have a built in walking foot.

Share this post

Comment (1)

Leave a Reply

Your email address will not be published. Required fields are marked *